I moved into my house 2 years ago and had this project on the back burner. I had 2 claw foot end tables with glass on top and wanted something more Beachy Coastal looking so I decided to get this project done once and for all.
I took the glass off the top and then realized that I could also remove the curved wood, which I really didn’t like. My project now had great possibilities.
Here is the table minus the glass and curved wood.
I used an off white chalky paint that I bought from Joanne’s. I gave it 2 coats and did a little light sanding to smooth the paint and then used a heavier sandpaper to create some distressed marks. I then applied two light coats of MINWAX Water Based Polycrylic Satin Finish that I bought from Lowes. You can also use a chalk wax or a different finish if you prefer.
I went to Home Depot and picked up some really nice pine wood planks. I cut them so that they were about 1 inch bigger than the base of my table. I don’t have a circular saw, so I used a hand saw to cut each piece. I placed the planks on my workbench and used another piece of board to make sure they were aligned. I used clamps to hold down the first plank. I took a smaller wood strip and drilled holes before screwing it to the table top.
I lightly sanded the edges and top of my new table top. Now it was time to paint it.
used the off white chalk paint for the base of my table and the light blue chalk paint for the tabletop. After painting the wood table tops , I then used an Antiquing Dark Satin Acrylic Wax that I bought from Lowes.
continue reading on next page(>)